III. Test Setup

_{Images are found on the web and owned by respective owners}

Motherboard: Intel® D975XBX Desktop Board
The Intel® Celeron® D 326 Processor will be slotted on the Intel® D975XBX Desktop board for some overclock-loving spree. This motherboard supports Intel® Pentium® D 955 XE so this processor shouldn't be a problem. This motherboard also supports a lot of features, but for the purpose of testing, I will limit the system build on the basic components: a single floppy, a SATA RAID 0 hard drive, a single IDE optical drive, a PCIe video card, and 2x512MB of DDR2-533MHz RAM.

Memory: ES DDR2-533MHz RAM/Nanya* Chips 2x512MB (CL5-4-4-12 SPD)
The RAM used will be a value RAM with Nanya chips, rated at DDR2-533MHz CL5-4-4-12 but can do DDR2-700MHz CL4-4-4-12 on stock voltage. This should be good enough for a 1:2 ratio when used with a processor that runs on 133MHz system bus (i.e. 133MHz = DDR2-533MHz on 1:2 ratio). However, since this overclocking will be focused only on changing the frequency and not touching any of the voltage tweaks, 2:3 ratio should be the better choice. At 1:1, it would be crippling the RAM too much since even if I hit 250FSB, the RAM will only run on DDR2-500MHz, and mind you, with the processor's 20x multiplier, this would be pushing the processor to 5GHz, not an easy task on air, much more for the stock cooler. The 1:1 ratio should be good for some testing though, i.e. ensuring that RAM will not be the bottleneck. But since I have tested this RAM to run at a much higher frequency, I will be using the 2:3 ratio.

Hard Drive: Seagate* Barracuda 120GB SATA RAID 0
To speed up installation of OS and access of files, I decided to use my two(2) Seagate* Barracude SATA hard drive and configured it as RAID 0. While this isn't usual with overclocking, where the use of IDE ensure a better stability at a higher FSB, I decided to use this since I am not expecting very high overclock.

Video Card: Power Color* X800GT
I decided to use a Powercolor X800GT PCIe Video Card as this would fit most of those who likes mainstream gaming and powerful 2D graphics. This video card is also powerful but it does not gulp large amount of electricity which should help me ensure the stability of the motherboard. The video card will not be modified nor tweaked in any way. I would have opted for a PCI-based video card, but the ones I have won't work so I am stucked with using a PCIe-based video card.

Power Supply: HEC* WinPower 550
To ensure that I will not be hampered by power fluctuation and instability, I used a much beefier power supply that I can currently muster out of my lab. While I have Antec Neo 480w, Ultra X-Connect 500w, and Enermax 450W the WinPower has 550w in reserve power. The other benefits of this power supply is, aside from the bling bling blue LED fan, is that it has native 24Pin ATX, SLI ready, and has two(2) 2x2 12v connector.

Chassis: Thermaltake* LANFire Xaser III
Testing will be done inside my trusty Thermaltake LANFire Xaser III. The choice of chassis is just out of random, to ensure that I will be getting an accurate results with temperature reading of the CPU both in idle and full load. This chassis has proven itself to me for quite some time and I know that it offers great air flow. I also love the chassis for its light weight design, and nice clear side panel window. This chassis doesn't come with a power supply, and I believe can be had for less than Php7,000. Pretty pricey, but all I can say is that I really love this chassis and hasn't cause any parts installed inside it to burn.

Optical Drive: OEM DVD Drive
Well, I don't particularly have a use for a good known DVD drive but if you have one and willing to donate it to me, then I'm all open arms :). Anyway, this OEM DVD drive will remain nameless until I got off my lazy bum, but nonetheless, this DVD drive has served me well and has never let me down. It's really an old DVD drive, and I don't even know how fast this baby run. One thing is sure though, it's longer than usual drive seen today and it's a lot heavier.

Full Specifications

• Processor: Intel® Celeron® D 326 (2.53Ghz)/Stock Cooler
• Motherboard: Intel® D975XBX i975
• Memory: 2x512MB DDR2-PC4300@DDR400@CL4-4-4-12(Auto)
• Video Card: Powercolor* X800GT 256MB
• Hard Disk: Seagate* Barracude 120GB x2 RAID 0
• Optical Drive: OEM DVD Drive
• Floppy Drive: Sony 1.44Mb
• Chassis: Thermaltake* LanParty
• Power Supply: HEC* WinPower 550
• Operating System: Windows* XP SP2

It's time to party!